6 Little-Known CZ 1012 Problems + Solutions
CZ 1012 shotgun has been around for quite some time now. If you own one or you’re looking forward to adding one to your collection, the firearm is worth the hype based on its performance.
It’s however important to be mindful of the problems it may run into along the way. CZ 1012 issues aren’t limited to jamming, ejecting, cycling, and failure to feed, among others.
In this blog post, I will walk you through CZ 1012 problems and their possible solutions.
Overview of CZ 1012 problems and solutions
I picked up a CZ 1012 shotgun for hunting a few years ago. Since then, I have definitely enjoyed shooting at the range though I encountered some common problems including;
| Problem | Possible solutions |
| Jamming problem | Take apart, clean, and lubricate; seek gunsmith help if necessary. |
| Ejecting issue | Clean and oil your shotgun regularly to ensure smooth operation. |
| Failure to feed | Use high-quality shells that are compatible with your gun. |
| Cycling issue | Check the bolts, rails, and springs whether they are in good condition as these are crucial for smooth cycling. |
| Barrel problem | Pay attention to a worn-out barrel and replace it if need be. |
| Problem with the choke tube | Maintain your choke tubes to prevent build-up that obstructs their operation. |
Other interesting posts:
1. Ejection issue
Dealing with the ejection issue on the CZ 1012 was a real challenge. Imagine being out there, firing a shot, and the shell refuses to exit the weapon.
It’s not just frustrating; it’s a common jamming scenario that leaves you stuck with a shell clinging to the chamber for dear life.
You can’t just slide the bolt back to free it, and that’s where things get tricky. A dirty gun chamber or a broken extractor claw could be the culprits behind this issue.
Solution
To tackle this problem, I discovered that a thorough cleaning of the chamber did wonders.
It wasn’t just about cleaning, though; I also checked every part’s condition to ensure nothing was broken or out of place.
Some elbow grease, a detailed inspection, and patience set things right.
It took a few tries, careful examination, and a lot of determination, but eventually, the CZ 1012 was back in action. This fixable problem requires a keen eye and a steady hand.
2. Cycling issue
The cycling issue with the CZ 1012 caught my attention early during testing. While aiming for rapid firing, the issue really kicked in.
It’s as if the gun doesn’t want to keep up with your speed. The cycling rate of the bullets was much slower compared to other models, especially if positioned in unconventional ways.
This isn’t just a nuisance; it distracts the entire shooting experience. You’re out there trying to fire, and it feels like the firearm is dragging its feet.
Solution
Overcoming this issue involves regular cleaning. Paying special attention to the cycling rails made a substantial difference.
After shooting dirty rounds in winter skeet activities, I made sure to clean thoroughly. It might seem basic, but with the CZ 1012, it’s crucial.
Once I took care of the cleaning, the slow cycling turned into a non-issue. Sometimes, simple maintenance can significantly improve the performance.
3. Jamming problem
Jamming issues with the CZ 1012 are quite notorious. When using shells, a specific jamming pattern emerges.
The first shell fires and ejects fine, but the second one sticks in the firing position.
Additionally, choke tubes jamming in the barrel can be a constant headache.
These issues are not one-time mishaps but consistent problems.
Solution
Addressing this requires time and attention but is not impossible. Taking the rifle apart, cleaning it, and applying oil to the right places can do the trick.
A deep cleaning, ensuring every component is free of dirt or debris, can bring the CZ 1012 back to life.
However, if the problem persists, don’t hesitate to contact a gunsmith or CZ directly.
While cleaning resolved it in my case, knowing when to seek professional help is crucial.
4. Failure to fire
The failure to fire issue is exasperating. You pull the trigger, expecting to hit a target, and get silence instead.
This could be due to a faulty cartridge, a bad primer, or issues with the firing pin.
In many cases, a dirty firing pin is the culprit. Dirt and debris can make the pin lazy, lacking the force to ignite the primer.
A weak hammer spring does exacerbate the problem.
Solution
The fix involves careful cleaning of the firing pin area and checking the hammer spring.
Ensure no dirt is blocking the firing pin and that the hammer spring is in good shape.
A bit of careful attention can turn a stubborn shotgun into a responsive piece of equipment.
5. Problem with the choke tube
The choke tube jamming is a genuine headache. This issue often stems from the chokes expanding at different rates, with bits of plastic getting stuck between them.
The plastic could come from a shot cup or wad, and once jammed, it feels like it’s there to stay.
Solution
I addressed this problem by ensuring the choke screws are greased. Dropped choke tubes or slightly out of round, are often to blame.
Clean the choke tubes and tighten the choke tube to the proper level when installing it.
Following these steps can resolve the choke tube jamming issue.
6. Barrel problem
Another serious issue concerns the barrel. A noticeable gouge about six inches into the barrel and a three-inch segment of the bore appeared unlined.
It was apparent that the choke was not centered when machined, leaving a visible half-moon.
Solution
This problem likely stems from a factory fault. Thoroughly clean the barrel to remove any debris or dirt.
If that doesn’t work, contact CZ directly. In some cases, sending the firearm back to them might be necessary.
While not ideal, working with CZ directly may be the only way to address this manufacturing issue. Patience is the key to getting the firearm back to working order.
Final thoughts
The CZ 1012 is a solid choice for budget-conscious shooters, offering intuitive handling at an attractive price point.
While the trigger could be improved, its smooth operation makes it a contender in the under $1,000 inertia-driven shotgun market.
Overall, the CZ 1012 is definitely worth considering for those seeking a reliable shotgun.
FAQS
What type of shotgun is the CZ 1012?
The CZ 1012 is a semi-automatic shotgun that utilizes an inertia operating system.
What gauge is the CZ 1012 available in?
The CZ 1012 is primarily available in 12 gauge.
What is the capacity of the CZ 1012?
The standard magazine capacity is 5 rounds, but it can be extended with aftermarket accessories.
Is the CZ 1012 suitable for hunting?
Yes, the CZ 1012 is a versatile shotgun suitable for various hunting applications, including waterfowl, upland game, and turkey hunting.
Is the CZ 1012 reliable?
The CZ 1012 has generally received positive feedback for its reliability, especially considering its price point.
Does the CZ 1012 come with choke tubes?
Yes, the CZ 1012 typically comes with a set of interchangeable choke tubes to adjust the shot pattern for different shooting situations.
Where can I purchase a CZ 1012?
The CZ 1012 can be purchased from authorized CZ dealers, gun shops, and online retailers.