8 Glock 19X Problems (Get Them Fixed)
The new Glock 19X is the most outstanding semi-auto pistol for shooters. Released in 2018, G19X combines the best features of the Glock 17 and 19 models.
It’s basically a Glock 19 slide on a Glock 17 frame. But as with any firearm, Glock 19X has its share of problems that can frustrate you. Check the Glock 17 problems as well.
The good news is that there are simple solutions to these potential issues. In our article today, we’ll discuss the most frequent Glock 19x problems and how to fix them.
Here are Glock 19X problems and solutions
| Problem | Solutions |
| Failure to feed | Clean, lubricate, and inspect some components, such as the grip |
| Ejection issues | Clean, lubricate, and replace the ejector if it is damaged. |
| Trigger problems | Regularly clean the trigger assembly and utilize high-quality trigger upgrade kits. |
| Slide lock prematurely engaging | Adjust the grip so that your thumbs point forward |
| Firing pin breakage | Replace a Glock 19X firing pin |
| Magazine release button sticking | Clean the area around the mag release button to remove any dirt |
| Sights coming loose | Firmly tighten the screw in the center of the rear sight |
| Grip design flaws | Make the grip more ergonomic and smaller |
1. Failure to feed
The most common problem with the Glock 19X is failure to feed, where rounds get stuck on their way into the chamber. As a result, your gun will jam up on you.
This can happen for various reasons, including a dirty magazine, improper grip, or a damaged recoil spring.
How to fix:
Here’s how to troubleshoot your underperforming Glock 19X;
- Clean and lubricate your 19X. Gunk build-up is the enemy of smooth operation. Disassemble your pistol and give all parts a good scrubbing with solvent according to the manual. Pay extra attention to the feed ramp, chamber, and barrel.
- Check your ammo. Damaged and low-quality rounds can result in feeding problems. Try firing high-quality self-defense rounds from reputable brands.
- Ensure a proper grip on the firearm. Be sure to hold the 19X properly and maintain a firm grip. A loose grip can tend to bring in feed issues.
- Inspect your magazine. Check your mags for dents, rust, or loose springs. Glock OEM magazines are the most reliable, so you may need to replace damaged mags.
2. Ejection issues
The ejection issue is another problem you’ll encounter with the Glock 19X. This problem can hinder its optimal functioning.
The primary concern is the failure of spent casings to be reliably ejected from the firearm when firing.
Several potential causes for this ejection issue include improper grip, weak ammunition, or a build-up of debris within the firearm’s ejection port and worn ejector.
How to fix:
To address this matter, you should;
- Perform a thorough inspection of your Glock 19X to ensure everything is in good shape.
- Ensure the gun has a firm and consistent grip. Combined with proper shooting posture, this technique does promote the correct ejection pattern.
- Use high-quality ammunition from reputable manufacturers that meet the firearm’s specifications. This is because weak rounds can lead to erratic ejection behavior.
- If the ejection issue persists, seek help from a qualified firearms technician.
- Clean and lubricate the extractor.
- Replace the ejector if it is damaged.
3. Trigger problems
The trigger is one of the most critical components of any firearm. The Glock 19X comes with it, much like other high-end guns.
Trigger problems in the Glock 19X can compromise the pistol’s performance. One leading cause is a build-up of dirt within the trigger mechanism, leading to a sluggish trigger pull.
Additionally, damaged trigger components may result in unreliable trigger actions, negatively affecting accuracy during the shooting process.
The impact of trigger problems on gun use can jeopardize precision and safety.
How to fix:
I was able to mitigate trigger problems by:
- Regularly cleaning the trigger assembly. This keeps Glock 19X parts free from dirt
- Proper gun maintenance. Regular maintenance is essential when it comes to firearms
- Replacing damaged trigger components. Replace or upgrade work components.
- Utilizing high-quality trigger upgrade kits
4. Slide lock prematurely engaging
Your Glock 19X’s slide may lock back before the mag is empty. An improper grip can cause your thumb to inadvertently engage the slide stop lever, locking the slide open.
Over time, the slide-stop spring can weaken or get damaged, preventing it from pushing the slide-stop down with enough force.
It’s also possible for built-up dirt or carbon to get caught under the slide stop, holding it up. In rare cases, the slide stop itself can become bent.
How to fix:
These are the possible solutions:
- Adjust your grip so your thumbs point forward, away from the slide stop.
- Inspect the slide stop spring, as you may need to replace it
- Disassemble your G19X and clean the slide stop to remove any built-up grime. You can lubricate the slide stop before reassembling your gun.
- Have a Glock-certified armorer inspect the 19X’s slide stop.
Now get out to the range and put some rounds downrange.
5. Firing pin breakage
The firing pin in your G19X is a small but critical component. After some time, the pins can become broken, preventing your pistol from firing correctly.
Here are some signs your 19X’s firing pin may need replacement and how to install a new one.
- A “dead” trigger is the most obvious clue. The firing pin will malfunction if you pull the trigger and the striker doesn’t release.
- You may also notice the firing pin protruding from the breech face or slide. The firing pin should retract fully when the trigger is released.
How to fix:
- Replace a Glock 19X firing pin. Installing a new one is a straightforward process.
- Only use the firing pins from the manufacturers. Products from other brands may compromise safety and performance.
- Routine inspection will help keep your Glock 19X running reliably and prevent unexpected failures.
If problems persist, consult a certified Glock armorer.
6. Magazine release button sticking
The magazine release button on your gun will likely become stuck over time due to built-up grime. This prevents your magazine from dropping freely when the button is pressed.
How to fix:
Here are a few steps to try and unstick a jammed mag release:
- Clean the area around the mag release button to remove any dirt. Use a cotton swab dipped in gun oil and swab around the button.
- Lubricate and work the button. This involves applying lubricant directly to the mag release button and around the edges where it meets the frame.
- Disassemble and clean. If else doesn’t work, disassemble your gun to clean the mag release components.
7. Sights coming loose
Sights falling off is another potential problem with Glock 19X. This happens over time, thereby impacting your accuracy and precision.
How to fix:
Here are a few tips to tighten loose sights:
- Use a flathead screwdriver to firmly tighten the screw in the center of the rear sight. Don’t overtighten it.
- Replacement is necessary for damaged or missing sights. Replacing problematic sights is often easy for the at-home gun owners to do themselves.
8. Grip design flaws
This problem is subjective, though. The large grip size of the 19X may be too big for those with smaller hands to get a proper hold and control of the pistol.
How to fix:
- Make the grip smaller and more ergonomic. You can install a polymer grip reduction kit that shaves down parts of the grip frame to shorten it.
Is Glock 19X worth buying despite these problems?
Like many guns, the Glock 19X isn’t perfect. However, the Glock 19X’s performance outweighs the reported issues, if they can be mitigated through proper maintenance and upgrades.
Yes, Glock 19X is worth the hype. It features a compact size for concealed carry, a large magazine capacity, and a reliable track record in the firearms community.
Best alternatives to Glock 19X
Smith & Wesson M&P9 M2.0 Compact
The M&P9 M2.0 Compact is a longstanding choice among shooters. It boasts a similar compact size to the Glock 19X, making it suitable for concealed carry.
The M2.0 version offers improved trigger characteristics. This provides a smoother and more consistent pull.
Smith & Wesson’s reputation for producing reliable firearms adds to its appeal.
SIG Sauer P320 Compact
The SIG P320 Compact has recently gained traction due to its modular design, allowing you to easily change grip sizes and calibers.
This adaptability makes it a versatile option for various shooting needs. It features a striker-fired system, providing a consistent trigger pull.
Shout out to the Sig P320’s durability, accuracy, and a couple of configurations that make it a strong competitor to the Glock 19X.
Walther PPQ M2:
The Walther PPQ M2 stands out for its excellent trigger. If you want a mode that offers a short reset and smooth pull, go no further.
What I like about the PPQ M2 is the well-designed grip that provides a comfortable hold. Its robust construction is the reason it matches the Glock 19X.
Frequently asked questions
How can I prevent stove piping in my Glock 19x?
Address the stove piping problem by ensuring a firm grip to maintain proper recoil control. Use high-quality ammunition, and regularly clean and lubricate the firearm to boost smooth ejection.
How do I choose the right holster for my Glock 19x?
Consider factors such as carry style, material, retention level, comfort, and compatibility with your body type and intended use.
What should I do if my Glock 19x keeps jamming?
First, inspect and clean the firearm thoroughly to remove dirt. Use high-quality ammunition; on top of that, check the magazine for any issues.