9 Biggest Taurus G3C Problems (What To Do)
For the last few months, I’ve been testing the Taurus G3C to find out what it offers avid shooters. The gun feels good in the hand.
Overall, it’s a reliable CCW gun that you can get for around $300. However, I into a few issues with it during all that time.
This article puts together some Taurus G3C problems you should know and the practical solutions that worked for me.
Here are Taurus G3C problems and solutions
Problems | Solutions |
Failure to feed | Polish the feed ramp regularly |
Occasional jamming | Use high-quality ammunition |
Cycling issue | Examine the extractor and ejector for any damage |
Light strike issue | Change the firing pin spring and primer if there’s any wear |
Barrel problem | Replace the barrel after proper disassembling. |
Extraction issue | Clean the chamber |
Not going into battery | Polish the barrel carefully |
Issue with the slide | Don’t fire your gun too rapidly |
Magazine release problems | Ensure that the magazine release spring is properly seated |
1. Feeding issues
One of the most frequent problems you’ll experience with your Taurus G3C is the failure to feed. My gun didn’t feed certain types of ammo, specifically with nickel alloy bullets.
Having to stop a jam interrupts the natural flow of shooting. It can be irritating, especially if you’re in a shooting competition.
The first cause of this problem is improperly loaded ammunition. A damaged magazine may cause feeding issues, too. Dirt can impede the smooth operation of the gun.
Solution
One potential solution involves inspecting and cleaning the magazine to ensure smooth functioning. I used this technique to solve most of the Stoeger M3000 problems as well.
Verifying proper loading techniques, such as aligning the cartridges correctly, can also alleviate the problem.
Regular maintenance, including lubricating moving parts, helps prevent friction-induced failures.
2. Occasional jamming
I faced occasional jamming with my Taurus G3C, which significantly impacted the gun’s performance.
Frustration during critical moments, such as self-defense scenarios or competitive shooting, may compromise the shooter’s effectiveness.
Intermittent jamming in the Taurus G3C may arise from several factors, often impeding the firearm’s smooth operation.
One primary cause is inadequate lubrication. When insufficiently lubricated, the gun’s moving parts experience increased friction, leading to occasional jams.
Another potential contributor to jamming is the use of substandard-sized ammunition. The Taurus G3C is designed to function reliably with specific calibers and bullet types.
Deviating from these specifications may result in failures to eject spent cartridges.
Solution
Addressing these potential causes of jamming through proper maintenance, lubrication, and adherence to ammunition specifications is paramount.
By doing so, I minimized the occurrence of jams, ensuring a more consistent performance from the Taurus G3C.
3. Cycling issue
The cycling issue in the Taurus G3C firearm pertains to the malfunction in the gun’s mechanism, hindering the reliable cycling of rounds. The impact of cycling problems on the shooting experience is notable.
This issue compromises the shooter’s ability to deliver accurate and timely shots, and this jeopardizes personal safety.
One common cause of this problem is a damaged recoil spring. A compromised recoil spring may fail to provide the necessary force to cycle the slide properly. This results in feeding and ejection issues.
Improper lubrication is the next cause of this problem. Inadequate lubrication of moving parts can impede the smooth operation of the firearm, leading to cycling issues.
Ammunition that does not meet the manufacturer’s specifications can fail to cycle correctly as well.
Solution
I discovered that you can fix this issue through proactive maintenance and regular replacement of critical components.
A meticulous adherence to ammunition specifications is also crucial for enhancing the shooting experience with the Taurus G3C.
Afterward, I noticed a more efficient performance from their firearm.
4. Light strike issue
This problem primarily stems from the recoil spring assembly, a crucial component responsible for managing the slide’s movement.
Reports indicate that the spring may occasionally fail to function correctly, resulting in failures to cycle properly.
This malfunction disrupts the firearm’s ability to eject spent casings and chamber new rounds. You’ll experience stoppages during shooting sessions.
The root cause of the cycling issue lies in the manufacturing of the recoil spring assembly.
Solution
To address this, Taurus recommends thorough cleaning, ensuring proper lubrication, and inspecting the recoil spring for any signs of damage or wear.
Additionally, users have found success in replacing the stock recoil spring with an upgraded version, often made from higher-quality materials.
Taurus has also responded to user feedback, and some models have undergone design improvements to enhance overall reliability.
5. Barrel problem
While using the Taurus G3C, I encountered an issue with its barrel that significantly impacted the shooting experience. The problem lies in the barrel lug, which can break or fracture during use.
This compromises the gun’s structural integrity and accuracy. When this occurs, it poses a safety risk. The cause of the problem is related to the metallurgical quality of the barrel lug.
Solution
To address this, Taurus recommends checking your firearm’s serial number to determine if it falls within the affected range.
If so, they advise contacting customer service for a replacement barrel. It’s crucial to address this issue promptly to ensure the firearm’s reliability and, more importantly, your safety during use.
Always prioritize safety, and if you own a Taurus G3C, be proactive in addressing this barrel problem.
6. Extraction issue
Next, I encountered an extraction problem with my G32. When firing, the spent casings tend to get stuck in the chamber, causing malfunctions.
This issue is often caused by a combination of rough chamber finish and weak extractor tension.
Solution
To solve this, Taurus recommends that the user polish the chamber to a mirror-like finish. You should also adjust the extractor tension for better reliability.
Using high-quality ammunition also helps prevent extraction issues. When the extraction problem is resolved, the shooting experience with the Taurus G3C becomes much more enjoyable, with consistent ejection of spent casings.
7. Not going back into battery
Using the Taurus G3C, I faced a concerning issue of the gun not going back into battery. The problem arises when the slide fails to fully close and lock into position, hindering the firing cycle.
This malfunction impacts accuracy, reliability, and overall performance. The cause often lies in the recoil spring assembly or other components affecting the proper functioning of the slide.
Related Post: My Glock 19 not going back into battery.
Solution
I got rid of this problem by inspecting the recoil spring for wear. And because this part was damaged, I replaced it in the minimum time possible.
You should also clean the firearm thoroughly after every use. This is to ensure every part of your gun is in good shape.
If the problem persists, Taurus recommends contacting their customer service for assistance. Addressing this issue promptly is crucial to maintaining the gun’s functionality.
8. Slide stuck
On rare occasions, there have been reports of the Taurus G3C having a slide stuck problem. This mostly happens when you’re dealing with used firearms.
This is where the slide, which is the upper part of a semi-automatic pistol, is not moving freely as it should.
The slide plays a vital role in the firearm’s cycling process. It’s responsible for ejecting spent cartridges, chambering a new round, and cocking the hammer for the next shot.
A stuck slide can occur for various reasons, such as dirt obstructing the slide’s movement, mechanical issues, or problems with the recoil spring.
Solution
This situation is a serious concern because it affects the gun’s functionality, rendering it inoperable. The solution to this issue seems to be simply making sure your gun is clean and lubricated.
Any time you’re using the gun, confirm you’re using factory ammunition to eliminate any potential problem.
9. Magazine release problem
Another problem that’s been mentioned a couple of times is the tendency of the magazine not consistently dropping free when the release button is pressed.
This issue can impact the user’s ability to quickly and efficiently reload during shooting. The cause of this problem is often attributed to the magazine release button being stiff or not properly engaging with the magazine.
Solution
It’s easy to fix this problem. Just consider examining the magazine release button for any obstructions that may impede its function.
Meanwhile, you should apply lubrication to the release button and its mechanism to help smoothen the operation.
Regularly testing the magazine release function after any adjustments is crucial to guarantee reliable performance.
Frequently asked questions
Does the Taurus G3c jam?
Taurus G3c may experience occasional jams, as with any firearm.
Are Taurus G3c good guns?
Taurus G3c is generally considered a reliable and cost-effective option.
Does the Taurus G3c have a lot of recoil?
The recoil on the Taurus G3c is moderate.
Which is better, Taurus G3 or G3C?
The choice between Taurus G3 and G3c depends on personal use and needs. The G3 is slightly larger, offering a higher capacity, longer barrel, and more sight radius, which might be preferred for target shooting. The G3c, being more compact, is better suited for concealed carry due to its smaller size.
How many rounds will a Taurus G3c last?
It holds a 10+1 capacity magazine of 9mm or an extended one with 12 rounds.