Recently, I’ve been thrilled to test Glock pistols in the field. The Glock 44 is one of a kind, a firearm you can rely on during the hunting season.
My field experience was, however, marred with some occasional Glock 44 problems, such as failure to extract.
In this article, I will highlight the snags you may encounter and discuss how you can address them.
Here are Glock 43X problems and solutions
| Problem | Solution |
| Extractor issue | Use high-quality ammunition. |
| Trigger reset | All components of the trigger assembly should be well aligned. |
| Grip size (large grip) | Consider aftermarket solutions (utilize grip adapters or sleeves). |
| Round ejection | Cleaning the gun regularly |
| Magazine problem | Replace the magazine follower |
1. Extract issue
One common issue you get into while using your Glock 44 is the “failure to extract” issue. This problem happens when the spent cartridge case is not ejected from the chamber after firing.
I noticed that the root of this malfunction lies in the interaction between the ammunition and the extractor mechanism.
G44, a .22 caliber pistol, operates with less force than its centerfire counterparts. This makes it more sensitive to ammunition with low quality.
Solution
To address this issue, you should first ensure you’re using high-quality .22 LR ammunition, as this provides more reliable cycling of the action.
Regularly cleaning the firearm, particularly the chamber, can also significantly reduce extraction issues.
Try to replace the stock extractor with an aftermarket option designed for enhanced performance. This option can offer a more permanent solution.
For those less inclined to modify their firearm, contacting Glock for advice may yield positive outcomes.
2. Trigger reset
Failure to extract isn’t the only issue your Glock 43X will run into. Another prominent problem is the trigger reset failure. It’s where the trigger fails to reset after racking back the slide.
This malfunction disrupts the standard firing procedure, rendering the firearm temporarily inoperable until the issue is resolved.
Common causes include the misalignment of the trigger components, weakened springs, or the accumulation of dirt within the trigger mechanism.
Such obstructions or mechanical failures hinder the trigger’s ability to return to its original position.
Solution
To resolve trigger reset issues, I considered several solutions. A comprehensive cleaning of the trigger mechanism may remedy the problem, as dirt impedes the trigger’s movement.
If cleaning does not suffice, inspect the trigger springs for wear. Replacing can be an effective solution.
You need to ensure that all trigger assembly components are correctly installed as well. In cases where these steps do not resolve the issue, consult a professional for a complete diagnosis.
3. Grip size
Despite its good performance, the Glock 43x has stirred discussions among most users regarding its grip size.
While it retains a manageable size for everyday carry, some shooters with smaller hands have noted that its slightly larger grip, compared to the original Glock 43, can affect handling comfort.
However, this characteristic allows for an increased magazine capacity – a significant advantage for many users.
Solution
Several aftermarket solutions have emerged to address the concerns regarding grip size and enhance the shooting experience for all users.
One effective way is the utilization of grip adapters or sleeves. This can alter the circumference and texture of the grip to better fit individual preferences.
Customized stippling on the grip provides a more comfortable hold, particularly for users with smaller hands.
These modifications not only cater to individual needs but also have the potential to improve the overall accuracy of the Glock 43X.
4. Round ejection
Some users I interacted with in the field have reported another pesky issue: round ejection. This is where a gun fails to properly eject spent cartridge casings from the firearm after firing a round.
When I fired a gun, the firing pin struck the primer of the cartridge, igniting the gunpowder inside the casing. This creates a high-pressure gas that pushes the bullet out of the barrel.
Simultaneously, the bolt or slide of the firearm moves backward, extracting the spent casing from the chamber.
Some common reasons for a round ejection issue include the weak ejection spring, which is responsible for providing the force needed to eject the spent casing.
A fouled chamber can also lead to ejection problems. Residue from fired rounds can prevent the spent casing from smoothly ejecting.
If the extractor tension is too loose or tight, it can cause ejection problems.
Solution
A round ejection issue can lead to malfunctions such as double feeds or even a complete stoppage of the firearm.
Cleaning the gun regularly, mainly focusing on the chamber and extractor, can prevent many ejection issues.
If the ejection spring is weak, it should be replaced with a new one that matches the firearm’s specifications.
Ensure the chamber is free of buildup for smooth ejection. And aside from that, fine-tune the extractor tension.
5. Magazine problem
Every shooter knows how important the magazine is in any semi-automatic firearm. It holds ammunition and feeds it into the firing chamber.
My gun had a problem with the magazine follower. The follower is the part of the magazine that pushes the rounds upwards as they are fed into the chamber.
The follower got stuck and couldn’t move smoothly. This issue prevented the proper feeding of rounds.
Solution
The first step was to remove the magazine from the firearm. Cleaned the follower, spring, and inside of the magazine body using a solvent designed for weapons.
This will help remove any dirt, debris, or residue that could be causing the follower to stick or not function properly.
A gunsmith suggested that replacing the follower would fix the problem if cleaning doesn’t solve the problem.
Most firearms manufacturers offer replacement followers for their magazines, or you can find aftermarket options.
Final verdict: Is it worth buying Glock 43x despite these problems?
Yes. The Glock 43X is a solid choice for those looking for a slim, reliable, and easily concealable handgun. However, its drawbacks might be significant to some shooters.
It could serve you well if you can live with or modify the trigger and other potential issues.
As always, it’s a good idea to handle one at a range, if possible, or at least watch reviews from trusted sources to better understand its quirks.
FAQS about Glock 43X
What is the magazine capacity of the Glock 43X?
The Glock 43X comes with a 10-round magazine plus one round in the chamber for a total of 11 rounds. However, there are also aftermarket options for extended magazines with higher capacities available.
What are the dimensions of the Glock 43X?
Overall Length: 6.50 inches (165 mm)
Slide Length: 6.06 inches (154 mm)
Width: 1.10 inches (28 mm)
Height: 5.04 inches (128 mm)
Barrel Length: 3.41 inches (87 mm)
Weight (Unloaded): Approximately 18.7 ounces (530 grams)
Does the Glock 43X have interchangeable backstraps?
Unlike other Glock models, the Glock 43X does not have interchangeable backstraps. The grip size is fixed, but many shooters find it comfortable due to its ergonomic design.
Are there aftermarket accessories available for the Glock 43X?
Yes, there is a wide range of aftermarket accessories available for the Glock 43X. These include sights, triggers, magazine extensions, holsters, and more.
It’s always recommended to ensure that any aftermarket parts are compatible before making any modification to your firearm.