Instant Solutions For Glock 27 Problems

Are you a Glock 27 owner facing performance issues? I have been using Glock 27 for a couple of years now and it does a great job for what it is.

While so many Glock machine guns have fallen out of favor, I use Glock 27 as a backup. Its compatibility is among the major selling points for the Glock 27.

Be that as it may, I faced some issues with it. In this blog post, I will share the common Glock 27 problems and instant solutions.

Overview of Glock 27 problems and solutions

Problem	Possible solutions
General issues	Regular maintenance, correct ammo
Jamming dilemma	Clean and lubricate, check ammo quality
Conversion barrel	Ensure proper installation, use recommended conversion kits
9mm conversion quirks	Check compatibility, use quality parts
Slide lock spring snags	Replace the spring, ensure correct installation
Feeding frustrations	Clean feed ramp, use high-quality magazines
Generation-specific	Update parts, follow generation-specific guidance

1. General issues

Occasional malfunctions, failures to feed, or inconsistencies in accuracy can occur due to lack of maintenance or the use of incorrect ammunition.

These issues can hinder the reliability and performance of the firearm, making it less effective for self-defense or target practice.

Solution

• Regular Cleaning: Disassemble your Glock 27 according to the manufacturer’s instructions and clean it thoroughly with a suitable gun cleaning solvent and brush. Pay particular attention to the barrel, slide, and frame rails.
• Proper Lubrication: Apply a thin coat of high-quality gun lubricant to the moving parts, including the slide rails, barrel hood, and connector. Avoid over-lubrication.

Using factory-loaded ammunition from reputable brands is another good move. Avoid hand-loaded ammunition, as these can be inconsistent in quality and may cause malfunctions.

Other interesting posts: 

• Glock 23 Gen 4 Problems (How I Sorted Them Out)
• Glock 43x Problems You Won’t Believe Exist (Effective Fixes)

2. Dreaded jamming dilemma

The pistol fails to cycle properly, often due to dirt, debris, lack of lubrication, or low-quality ammunition.

Jamming can render the Glock 27 inoperable, leaving the user vulnerable in a self-defense situation.

It also disrupts target practice and can be frustrating for the shooter. This is a common problem with Ruger LC9s Problems.

Solution

• Thorough cleaning: If your Glock 27 is jamming, disassemble and clean it thoroughly. Remove any debris, fouling, or unburned powder that may be causing the issue.
• Check ammunition: Inspect the ammunition for damage or defects. If you find any questionable rounds, discard them.
• Lubricate properly: Apply a thin coat of lubricant to the moving parts, as described above.
• Magazine inspection: Check the magazines for damage or wear. Replace any damaged magazines.
• Recoil spring: If the problem persists, consider replacing the recoil spring, as a weak spring can cause feeding issues.

3. Conversion barrel conundrums

When using aftermarket conversion barrels, compatibility issues or improper installation can lead to malfunctions, decreased accuracy, or even damage to the firearm.

Such issues can compromise the safety and reliability of the Glock 27. This makes it unreliable for self-defense or other purposes.

Solution

• Compatibility check: Verify that all the parts you are using for the 9mm conversion are compatible with your Glock 27 model and generation. This includes the barrel, recoil spring assembly, magazines, and any other relevant components.
• Quality parts: Use high-quality parts from reputable manufacturers to ensure reliable performance and prevent malfunctions.
• Professional installation: If you are unsure about the installation process, seek assistance from a qualified gunsmith. Improper installation can lead to dangerous malfunctions.

4. 9mm conversion

Similar to conversion barrel issues, using low-quality parts for a 9mm conversion can cause malfunctions, decreased accuracy, and potential damage.

The Glock 27 may become unreliable and unsafe to use, defeating the purpose of the conversion.

Solution

• Compatibility check: Verify that all the parts you are using for the 9mm conversion are compatible with your Glock 27 model and generation. This includes the barrel, recoil spring assembly, magazines, and any other relevant components.
• Quality parts: Use high-quality parts from reputable manufacturers to prevent malfunctions.
• Professional installation: If you are unsure about the installation process, seek assistance from a qualified gunsmith. Improper installation can lead to dangerous malfunctions.

5. Generational Glock 27 idiosyncrasies

Each generation of Glock 27 may have specific weaknesses that lead to malfunctions if not addressed.

Ignoring these generation-specific issues can result in decreased reliability and performance over time.

Solution

• Research: Research your specific Glock 27 generation to identify any known issues or quirks. This information can help you anticipate and address potential problems.
• Parts replacement: Replace any worn parts with genuine Glock parts from reputable manufacturers.
• Professional maintenance: If you are not comfortable performing repairs yourself, take your Glock 27 to a qualified gunsmith for inspection and service.

6. Slide lock spring snags

A damaged slide lock spring can fail to engage properly when shooting the target. As a result, the slide won’t lock back after the last round is fired.

While not a critical issue, it can disrupt the shooting experience, especially in training scenarios.

Solution

• Replace the spring: If your slide lock spring is causing problems, replace it with a new one. You can purchase high-quality aftermarket springs from reputable manufacturers.
• Correct installation: Ensure that the new spring is installed correctly. Refer to the Glock owner’s instructional videos for guidance.

7. Feeding frustrations

Failure to feed rounds into the chamber can be caused by a dirty feed ramp, low-quality magazines, or ammunition issues.

This problem can render the Glock 27 useless in a self-defense situation, as it prevents the gun from firing when needed. I also encountered this problem with the Glock 26 machine.

Solution

• Clean the feed ramp: Disassemble your Glock 27 and clean the feed ramp thoroughly with a solvent and brush. Remove any debris or fouling that may be hindering the feeding of rounds.
• High-quality magazines: Use high-quality magazines that are compatible with your Glock 27. Check ammunition: Inspect the ammunition for damage or defects. Use factory-loaded ammunition from reputable brands.

Frequently asked questions about Glock 27

Is Glock 27 reliable?

Absolutely! The Glock 27 is known for its reliability due to its robust design and precision engineering. Regular maintenance ensures optimal performance.

What issues do Glocks have?

Glocks may experience jamming, feeding issues, or challenges with aftermarket modifications. However, these issues can usually be resolved with proper care and maintenance.

Does a Glock 27 have a safety?

Yes, it does. Glocks have a unique Safe Action System with three automatic safeties that ensure the gun fires only when intended.

Is the Glock 27 controllable?

Yes, despite its compact size, the Glock 27 is controllable. Practice and training can help you master its recoil.

Why does my Glock 27 keep jamming?

Jamming can be caused use of wrong ammunition. Clean your Glock 27 regularly and use high-quality ammo.

Is the Glock 27 too small for effective self-defense?

No, it’s not. The Glock 27’s compact size makes it ideal for concealed carry, providing you with a powerful self-defense tool.